86 mm (3.38") 17 mm (.67") 0 12 mm (0.5") 12 mm (0.5") 26.5 mm (1.04") 30.5 mm (1.2") 1/2" GAS NPT 3/4" GAS NPT Specifications HI1001 HI2001 Measurement pH ORP Junction double, PTFE double, PTFE Electrolyte polymer polymer Temperature -5 to 80°C (23 to 176°F) - HT -5 to 80°C (23 to 176°F) Max Pressure 6 bar (87 psi) 6 bar (87 psi) Connector BNC BNC Cable 3 m 3 m Ordering Information HI1001 with 3 m (9.84') of cable attached HI2001 with 3 m (9.84') of cable attached Recommended Controllers BL981411, BL931700 BL982411, BL932700 HI1001 • HI2001 pH Electrode and ORP Electrode with Pt sensor for Continuous Flow-thru Monitoring Specifically Built for Industrial Applications The HI1001 (pH) and HI2001 (ORP) are flow-thru monitoring electrodes with BNC connection and 3 m cable that have been specifically built for industrial applications. These durable electrodes have a PVDF body with a protective PEI sleeve around the glass bulb for resistance against mechanical stress. This sensor provides a rapid response and high accuracy measurements for industrial applications. Spherical Glass Tip The spherical shaped tip design allows for a wide area of contact with the sample. This permits a faster electrode response with a higher degree of stability. PVDF Body Resistant to most chemicals and solvents, the PVDF body has high abrasion resistance, mechanical strength, and resistance to ultraviolet and nuclear radiation. PVDF is also resistant to fungal growth. PTFE Junction This type of junction is often used on electrodes with polymer electrolytes. Porous polytetrafluoroethylene (PTFE) is a hydrophobic material that is available with different porosities that helps to minimize clogging. Because of its chemical advantages, PTFE is widely used in industrial applications. Double Junction Reference The double junction design presents a silver-free electrolyte solution interacting with the sample, making the electrode less susceptible to clogging and guaranteeing a fast response and stable reading. This design allows measurement in applications where silver ions in the sample are undesirable or silver precipitates on the junction are likely to form. BNC Connector HI1001 and HI2001 use a BNC connector. This type of connector is universal in that it can be used on any pH meter that has the female BNC probe input. External Thread The top ½” NPT thread of the HI1001 and HI2001 allows for in-line installation while the bottom 3/4" thread (cable side) allows for submersion mounting. 86 mm (3.38") 17 mm (.67") 0 12 mm (0.5") 12 mm (0.5") 26.5 mm (1.04") 30.5 mm (1.2") 1/2" GAS NPT 3/4" GAS NPT 15 Process Instrumentation 15.88 | www.hannainst.com controllers
RkJQdWJsaXNoZXIy MTI3NTM=