HI1126-1805 pH and Temperature Industrial Smart Probe for Food Applications HI510 and HI520 Universal Process Controller compatible Designed as a versatile, general purpose electrode, HI1126-1805 is made of a sturdy, chemically resistant PP body with a conical tip probe that can be used in most food applications. Intended for industrial use when paired with the HI510 or HI520 Universal Process Controller, the system allows for shared management of settings between controller and probe. The probe manages temperature compensation and buffer calibration settings whereas the controller manages application settings defined by process requirements. • Chemically-resistant PP body • Specialized glass sensor for fast stabilization and accurate results • Built-in temperature sensor for measurement and compensation • Matching pin helps avoid typical problems caused by grounding loop current • Food grade, PVDF sensor sleeve that is easy to clean, disinfect, and resistant to most chemicals (e.g. solvents, sodium hypochlorite), ultraviolet light, and fungal growth • Model, firmware, serial number, and calibration information are stored on the wired probe Dimensions — 1805 HI1126 Ordering Information HI1126-1805 is supplied with HI70300 Storage solution for pH and ORP electrodes, and quick reference guide with probe quality certificate. 165 mm (6.5”) 45 mm (1.8”) Ø 25 mm (1.0”) Ø8 mm (0.3”) Specifications pH Range 0.00 to 12.00 pH Resolution 0.1 pH or 0.01 pH Accuracy ±0.02 pH Calibration Up to three-points (option to select from five standard buffers) Temperature Range 0.0 to 50.0 °C (32.0 to 122.0 °F) Resolution 0.1 °C; 0.1 °F Accuracy ±0.5 °C; 1.0 °F Calibration Single point offset (controller setting) Temperature Compensation Automatic 0.0 to 50.0 °C (32.0 to 122.0 °F) Temperature source Automatic (from probe) Manual Body PP Junction Open Sensor Body LT glass Sleeve PVDF Tip shape Conic Tip size 6 x 10 mm (0.23 x 0.39”) Diameter 8 mm (0.3”) Insertion length 45 mm (1.8”) Reference Cell Single Ag/AgCl Electrolyte Viscolene Maximum Pressure 0.1 bar (1.45 psi) Wetted Parts Sensor sleeve PVDF Sensor body Glass Protection Rating IP68 Cable Length 5 m (16’5”) 15 Process Instrumentation 15.65 www.hannainst.com | controllers
RkJQdWJsaXNoZXIy MTI3NTM=